Brass welding rod-Brass Welding Filler Metal--Product-浙江信和科技有限公司

Brass welding rod

Brass filler metal has good plasticity and high melting point. It can be used in brazing of copper, steel, cast iron, nickel-based alloy and cemented carbide with borax filler metal or gas filler metal. It can be completed by flame brazing, furnace brazing and induction brazing. Because of the high zinc content, the filler metal contains a small amount of silicon, and it is necessary to avoid overheating during brazing, so as to reduce the influence of zinc volatilization on the seam tightness and human health.

Product diameter：Different size available per customer's request
Product packaging：Different products are packaged according to customer requirements.
Product content：No

Is there any doubt? Contact us

Hotline：0579-82273918

Product details

National Standard Brass Welding Filler Metal

Standard	Correlative		Composition(by mass)/%						Melting		Characteristic & Application
Standard	DIN	AWS	Cu	Zn	Sn	Si	Mn	Other	Sol.	Liq.	Characteristic & Application
BCu60Zn(Si)	Cu301		58.5-61.5	Rem.	-	0.2-0.4	-	-	875	895	Common copper-zinc brazing filler metal used for brazing copper,steel and nickel-base alloy.
BCu60Zn(Si)（Mn）	Cu303		58.5-61.5	Rem.	≤0.2	0.15-0.40	0.05-0.25	-	870	900